| Get
A Grip! Get More Out Of Your Biceps Curls
By Nick Nilsson
Would you like to know how to get more out of every single dumbell
curl you do? Amazingly enough, you can do this simply by changing
where you grip the dumbell.
First, I’m
going to tell you what the trick is, then I’m going to tell
you exactly how and why it works. Then I’m going to finish
by telling you how to make the trick so powerful it’ll blow
your mind!
In a nutshell,
instead of gripping the handle in the middle (as is normally taught),
grip the handle with the thumb and forefinger side of your hand
pressed up against the inside of the dumbell plates. There will
be a space of several inches between your pinky and the other side
plates.
To take full
advantage of this change in your grip, start the curl with your
palms facing in to your thighs, otherwise known as a neutral or
hammer grip. As you curl up, rotate your forearm so that your palm
is facing up at the top of the movement. You should feel a strong
cramping in your biceps.
For pictures
demonstrating exactly how to execute this technique go to: http://www.fitstep.com/Misc/Newsletter-archives/issue7-bicep-tip.htm
Here’s
how and why it works:
The biceps muscle
has two main functions. The first is flexing the elbow (in essence,
bringing the forearm closer to the upper arm like when you bend
your arm to scratch your nose). The other function is called supination,
which is a biomechanical term for forearm rotation. Supination occurs
when you turn your hand from a palms-down position to a palms-up
position.
The traditional
dumbell curl without forearm rotation addresses the flexing function
of the bicep. Rotating your forearm as you curl the dumbell up invokes
the supination function of the bicep, working more of the muscle
mass of the bicep and giving you a stronger contraction.
Holding the
dumbell off-center essentially adds resistance to the supination
function of the bicep muscle. If you think about it, when you hold
your hand in the middle of the dumbell, the two ends are balanced
like two identical-weight people on a see-saw. You get very little,
if any, resistance on the supination.
By holding the
dumbell off-center, you tip the balance of the dumbell towards the
pinky side of your hand. Your bicep must then work against resistance
to accomplish the supination, adding in more resistance to the curl
movement.
This resistance
translates into more efficient work for the bicep and, ultimately,
more results for you!
---
Now I’m
going to tell you how to adapt this trick into something that will
make your jaw hit the floor on the first rep you do.
You’ve
learned about supination and adding resistance to the supination
movement by holding the dumbell off-center. You’ve felt the
difference this makes in your biceps.
Now imagine
how much more effective this trick will be if you add actual weight
for resistance instead of just shifting your hand over!
In order to
accomplish this, you’re going to need one of two things: do-it-yourself
dumbells with which you can add or remove weight or Plate Mates
(TM), which are small magnetic weight plates that stick to the metal
of the dumbell.
The execution
is simple: make a dumbell with more weight on one end than the other.
That’s it. For example, place 20 pounds of weight on one end
and 25 pounds of weight on the other.
Grip the dumbell
in the middle when you use it, making sure that the heavier end
is on the pinky side of your hand. If you are using Plate Mates
(TM), stick a few of them onto only one side of the dumbell to accomplish
the same imbalance.
Now when you
curl up and supinate, your bicep is going to have that added resistance
on the supination movement. The cramping sensation you get on the
very first rep as you come to the top and squeeze the muscle hard
will show you just how powerful this technique is. The pump you
get in your biceps after your set will seal the deal!
You will also
notice that your forearm and grip are getting a lot of work with
this trick. This is just icing on the cake and will not decrease
the tension on your bicep in any way.
Note: If you
are using dumbells that weigh less than 30 pounds total, I would
recommend you use a 2 1/2 pound plate on one side rather than a
5 pound plate. Any more than 30 and you should use a 5 pound plate.
Being a dedicated
trainer myself, I love to hear how well my tips work for other people.
It would be really gratifying to hear from you about how this technique
worked for you or any suggestions you might have as to how to make
it more effective.
You can send
your comments to me at betteru@fitstep.com.
And, when your
biceps are so pumped and sore that you can barely brush your teeth
the next day, be sure to tell everyone who will listen to you who
did this to you:
Nick Nilsson
at Fitstep.com!
For more information
about the anatomy of the biceps, go to http://www.fitstep.com/Advanced/Anatomy/Biceps.htm?news
About The Author
Nick Nilsson
is Vice President of BetterU, Inc., an online exercise, fitness,
and personal training company. Check out his latest eBook "The
Best Exercises You've Never Heard Of" at http://www.thebestexercises.com
or visit http://www.fitstep.com. You can contact him at betteru@fitstep.com
or subscribe to BetterU News, his fitness newsletter at betterunews@fitstep.com.
Article Source:
http://EzineArticles.com/?expert=Nick_Nilsson
|